Customer Care

  • Call: 800-617-5936
  • Fax: 732-612-1053
  • sales@gograiley.com
  • 5130 West Hurley Pond Road
  • Wall, NJ 07727-1601
Go Grailey Heavy Duty Leak Diverters with Bungees

Go Grailey Heavy Duty Leak Diverters With Bungee Connectors
Unfold and locate drain cups. For shipping, the drain cups are in an inverted position. Push up on the drain cup until it turns inside out. Now water can flow freely into cup.
Repeat steps 4-5 for all other grommets on diverter. Do not tighten until all bungees have been secured.
Push black hose fitting into bottom of drain cup until snug. Once inserted, tighten threaded ring to secure hose fitting to drain cup. Do not over-tighten ring.
Once diverter has been secured on all sides with bungees, slide cord through hoop to tighten. Adjust until water flows freely toward drain cups.
Separate optional quick connect and attached the male end of the quick connect into the hose fitting. Attach female side onto hose and set to side. It is easier to install diverter without the hose being attached.
When desired tightness is achieved, wrap cord around hook fastener and pull to secure. This will prevent the bungee cord from slipping out of place. Repeat on all other bungees.
Separate optional quick connect and attached the male end of the quick connect into the hose fitting. Attach female side onto hose and set to side. It is easier to install diverter without the hose being attached.
Attach the hose to drain cup. Insert other end of hose something that can contain the water coming down from diverter. Monitor the movement of water, so overflow or pooling on floor doesn't occur.
Secure opposite hook to a sturdy beam, pipe, hook or object that can hold the weight of the diverter and any water that may pools inside.* Bungee's are fully adjustable from six inches up to nine feet.
If you see that the water is not flowing freely, adjust bungees so water flows into drain cup and down hose. Place included caps onto any unused drain cups.